Overview

A beautiful flat matt (less than 2% sheen) sprayable paint for use on interior walls and ceilings. The high quality formulation is non-yellowing, quick drying, wipeable and microporous with low flashing and high opacity. The high whiteness and anti-reflective finish leaves a bright white finish on your walls. Ideal for large areas and trade use as it's highly suited to spraying.

• Excellent opacity and low odour
• Quick drying - only 2 hours
• Low splatter
• Breathable, microporous paint
• Flat Matt (less than 2% sheen)

Preparation

For the best results always thoroughly prepare the surface. Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax.

• On previously painted surfaces remove all loose or flaking paint and rub down with an abrasive paper where necessary.
• Areas affected by mould should be treated with a suitable .

Application

We always recommend testing a small inconspicuous area to ensure you are happy with the finished results.

• Stir the paint thoroughly and check the colour before use.
• Apply using a brush, roller or sprayer.
• On plasterboard or any porous substrate prime the surface by applying a first coat thinned with approximately 30% clean water.
• After preparation, apply at least one full coat and allow to dry for four hours. Then apply a further coat if necessary to ensure even coverage.
• Coverage may differ depending on the method of application.